Digitalphoto Image Viewers free download - Acronis True Image, CDisplay Image Display, Image to PDF Converter Free, and many more programs.
-->Applies to: Configuration Manager (current branch)
A boot image in Configuration Manager is a Windows PE (WinPE) image that's used during an OS deployment. Boot images are used to start a computer in WinPE. This minimal OS contains limited components and services. Configuration Manager uses WinPE to prepare the destination computer for Windows installation.
Default boot images
- 5 Mega pixel color sensor with On Semi Conductor’s breakthrough low-noise CMOS imaging technology to dramatically reduce image noise levels.
- Drive Image (PQDI) is a software disk cloning package for Intel-based computers.The software was developed and distributed by the former PowerQuest Corporation. Drive Image version 7 became the basis for Norton Ghost 9.0, which was released to retail markets in August 2004.
- Download Surface RT Recovery Image - This is a recovery package for Windows 8.1 devices that provides a ready-to-go image for restoring RT tablets to a working state.
Configuration Manager provides two default boot images: One to support x86 platforms and one to support x64 platforms. These images are stored in the x64 or i386 folders in the following share on the site server: <SiteServerName>SMS_<sitecode>osdboot. The default boot images are updated or regenerated depending on the action that you take.
Consider the following behaviors for any of the actions described for default boot images:
The source driver objects must be valid. These objects include the driver source files. If the objects aren't valid, the site doesn't add the drivers to the boot images.
Boot images that aren't based on the default boot images, even if they use the same Windows PE version, aren't modified.
Redistribute the modified boot images to distribution points.
Recreate any media that uses the modified boot images.
If you don't want your customized/default boot images automatically updated, don't store them in the default location.
Note
The Configuration Manager log tool (CMTrace) is added to all boot images in the Software Library. When you're in Windows PE, start the tool by typing cmtrace from the command prompt.
CMTrace is the default viewer for log files in Windows PE.
Use updates and servicing to install the latest version of Configuration Manager
When you upgrade the Windows Assessment and Deployment Kit (ADK) version, and then use updates and servicing to install the latest version of Configuration Manager, the site regenerates the default boot images. This update includes the new WinPE version from the updated Windows ADK, the new version of the Configuration Manager client, drivers, and customizations. The site doesn't modify custom boot images.
Upgrade from Configuration Manager 2012 to current branch
When you upgrade Configuration Manager 2012 to current branch, the site regenerates the default boot images. This update includes the new WinPE version from the updated Windows ADK and the new version of the Configuration Manager client. All boot image customizations remain unchanged. The site doesn't modify custom boot images.
Update distribution points with the boot image
When you use the Update Distribution Points action from the Boot Images node in the console, the site updates the target boot image with the client components, drivers, and customizations.
You can reload the boot image with the latest version of WinPE from the Windows ADK installation directory. The General page of the Update Distribution Points wizard provides the following information:
- The current Windows ADK version installed on the site server
- The current production client version
- The Windows ADK version of WinPE in the boot image
- The version of the Configuration Manager client in the boot image
New Image Drivers
If the versions in the boot image are out of date, use the option to Reload this boot image with the current Windows PE version from the Windows ADK.
Important
This action is available for both default and custom boot images. During this process to reload the boot image, the site doesn't retain any manual customizations made outside of Configuration Manager. These customizations include third-party extensions. This option rebuilds the boot image using the latest version of WinPE and the latest client version. Only the configurations that you specify on the properties of the boot image are reapplied.
The Boot Images node also includes a new column for (Client Version). Use this column to quickly view the Configuration Manager client version in each boot image.
After you update the Windows ADK on the site server, the console won't immediately show the new version. If you use one these actions to update a boot image, the site uses the latest ADK version. To get the console to display the current ADK version, restart the WMI service. For more information, see Starting and Stopping the WMI Service.
Customize a boot image
When a boot image is based on the WinPE version from the supported version of the Windows ADK, you can customize or modify a boot image from the console. When you upgrade a site and install a new version of the Windows ADK, custom boot images aren't updated with the new version of Windows ADK. When that happens, you can't customize the boot images in the Configuration Manager console. However, they continue to work as they did before the upgrade.
When a boot image is based on a different version of the Windows ADK installed on a site, you must customize the boot images. Use another method to customize these boot images, such as using the Deployment Image Servicing and Management (DISM) command-line tool. DISM is part of the Windows ADK. For more information, see Customize boot images.
Add a boot image
During site installation, Configuration Manager automatically adds boot images that are based on a WinPE version from the supported version of the Windows ADK. Depending on the version of Configuration Manager, you can add boot images based on a different WinPE version from the supported version the Windows ADK. An error occurs when you try to add a boot image that contains an unsupported version of WinPE. The following list is the currently supported Windows ADK and WinPE versions:
Windows ADK version: Windows ADK for Windows 10
Windows PE versions for boot images customizable from the Configuration Manager console: Windows PE 10
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
Windows PE 3.1Note 1
Windows PE 5
For example, use the Configuration Manager console to customize boot images based on Windows PE 10 from the Windows ADK for Windows 10. For a boot image based on Windows PE 5, customize it from a different computer using the version of DISM from the Windows ADK for Windows 8. Then add the custom boot image to the Configuration Manager console. For more information, see the following articles:
Note
Note 1: Support for Windows PE 3.1
Only add a boot image to Configuration Manager based on Windows PE version 3.1. Upgrade the Windows AIK for Windows 7 (based on Windows PE 3.0) with the Windows AIK Supplement for Windows 7 SP1 (based on Windows PE 3.1). Download the Windows AIK Supplement for Windows 7 SP1 from the Microsoft Download Center.
New Image Driver Download
In the Configuration Manager console, go to the Software Library workspace, expand Operating Systems, and then select the Boot Images node.
On the Home tab of the ribbon, in the Create group, select Add Boot Image. This action starts the Add Boot Image Wizard.
On the Data Source page, specify the following options:
In the Path box, specify the path to the boot image WIM file. The specified path must be a valid network path in the UNC format. For example:
ServerNameShareNameBootImageName.wimSelect the boot image from the Boot Image drop-down list. If the WIM file contains multiple boot images, select the appropriate image.
On the General page, specify the following options:
In the Name box, specify a unique name for the boot image.
In the Version box, specify a version number for the boot image.
In the Comment box, specify a brief description of how you use the boot image.
Complete the wizard.
The boot image is now listed in the Boot Image node. Before using the boot image to deploy an OS, distribute the boot image to distribution points.
Tip
In the Boot Image node of the console, the Size (KB) column displays the decompressed size for each boot image. When the site sends a boot image over the network, it sends a compressed copy. This copy is typically smaller than the size listed in the Size (KB) column.
New Image Dover De
Distribute boot images
Boot images are distributed to distribution points in the same way as you distribute other content. Before you deploy an OS or create media, distribute the boot image to at least one distribution point.
For more information on how to distribute a boot image, see Distribute content.
To use PXE to deploy an OS, consider the following points before you distribute the boot image:
- Configure the distribution point to accept PXE requests.
- Distribute both an x86 and an x64 PXE-enabled boot image to at least one PXE-enabled distribution point.
- Configuration Manager distributes the boot images to the RemoteInstall folder on the PXE-enabled distribution point.
For more information about using PXE to deploy operating systems, see Use PXE to deploy Windows over the network.
Modify a boot image
Add or remove device drivers to the image, or edit the properties of the boot image. The drivers that you add or remove can include network or storage drivers. Consider the following factors when you modify boot images:
Before adding drivers to the boot image, import and enable them in the device driver catalog.
When you modify a boot image, the boot image doesn't change any of the associated packages that the boot image references.
After you make changes to a boot image, update the boot image on the distribution points that already have it. This process makes the most current version of the boot image available to clients. For more information, see Manage content you've distributed.
New Image Dover
Modify the properties of a boot image
New Image Driver App
In the Configuration Manager console, go to the Software Library workspace, expand Operating Systems, and then select the Boot Images node.
Select the boot image that you want to modify.
On the Home tab of the ribbon, in the Properties group, select Properties.
Set any of the following settings to change the behavior of the boot image:
Images
On the Images tab, if you change the properties of the boot image by using an external tool, select Reload.
Drivers
On the Drivers tab, add the Windows device drivers that WinPE requires to boot. Consider the following points when you add device drivers:
Make sure that the drivers that you add to the boot image match the architecture of the boot image.
To only display drivers for the architecture of the boot image, select Hide drivers that do not match the architecture of the boot image. The architecture of the driver is based on the architecture reported in the INF from the manufacturer.
WinPE already comes with many drivers built-in. Add only network and storage drivers that aren't included in WinPE.
Add only network and storage drivers to the boot image, unless there are requirements for other drivers in WinPE.
To only display storage and network drivers, select Hide drivers that are not in a storage or network class (for boot images). This option also hides other drivers that aren't typically needed for boot images, such as video or modem drivers.
To hide drivers that don't have a valid digital signature, select Hide drivers that are not digitally signed.
Note
Import device drivers into the drivers catalog before you add them to a boot image. For information about how to import device drivers, see Manage drivers.
Customization
On the Customization tab, select any of the following settings:
Select the Enable Prestart Commands option to specify a command to run before the task sequence runs. When you enable this option, also specify the command line to run and any support files required by the command.
Warning
Add
cmd /cto the start of the command line. If you don't specifycmd /c, the command won't close after it runs. The deployment continues to wait for the command to finish and won't start any other configured commands or actions.Tip
During task sequence media creation, the wizard writes the package ID and prestart command line to the CreateTSMedia.log file. This information includes the value for any task sequence variables. This log is on the computer that runs the Configuration Manager console. Review this log file to verify the values for the task sequence variables.
Set the Windows PE Background settings to specify whether you want to use the default WinPE background or a custom background.
Configure the Windows PE scratch space (MB), which is temporary storage (RAM drive) used by WinPE. For example, when an application is run within WinPE and needs to write temporary files, WinPE redirects the files to the scratch space in memory to simulate the presence of a hard disk. By default, this amount is 512 MB for devices with more than 1 GB of RAM, otherwise the default is 32 MB.
Select Enable command support (testing only) to open a command prompt by using the F8 key while the boot image is deployed. This option is useful for troubleshooting while you're testing your deployment. Using this setting in a production deployment isn't advised because of security concerns.
Set default keyboard layout in WinPE: Starting in version 1910, configure the default keyboard layout for a boot image. If you select a language other than en-us, Configuration Manager still includes en-us in the available input locales. On the device, the initial keyboard layout is the selected locale, but the user can switch the device to en-us if needed.
Tip
Use the Set-CMBootImage PowerShell cmdlet to configure these settings from a script.
Optional Components
On the Optional Components tab, specify the components that are added to Windows PE for use with Configuration Manager. For more information about available optional components, see WinPE: Add packages (Optional Components Reference).
The following components are required by Configuration Manager and always added to boot images:
- Scripting (WinPE-Scripting)
- Startup (WinPE-SecureStartup)
- Network (WinPE-WDS-Tools)
- Scripting (WinPE-WMI)
The Components list shows additional items that are added to this boot image. To add more components, select the gold asterisk. To remove a component, select it from the list, and then select the red X.
The following components are commonly used by customers:
- Microsoft .NET (WinPE-NetFX): This component is a prerequisite for PowerShell. It's one of the larger optional components.
- Windows PowerShell (WinPE-PowerShell): This component requires .NET, and adds limited PowerShell support. If you run custom PowerShell scripts during the WinPE phase of your task sequence, add this component. There are other components that may be required for other PowerShell cmdlets.
- HTML (WinPE-HTA): If you run custom HTML applications during the WinPE phase of your task sequence, add this component.
For more information about adding languages, see Configure multiple languages.
Data Source
On the Data Source tab, update any of the following settings:
To change the source file of the boot image, set Image path and Image index.
To create a schedule for when the site updates the boot image, select Update distribution points on a schedule.
If you don't want the content of this package to age out of the client cache to make room for other content, select Persist content in client cache.
To specify that the site only distributes changed files when it updates the boot image package on the distribution point, select Enable binary differential replication (BDR). This setting minimizes the network traffic between sites. BDR is especially useful when the boot image package is large and the changes are relatively small.
If you use the boot image in a PXE-enabled deployment, select Deploy this boot image from the PXE-enabled distribution point. For more information, see Use PXE to deploy Windows over the network.
Data Access
On the Data Access tab, you can configure package share settings. If needed in your environment, set the option to Copy the content in this package to a package share on distribution points. You then have the additional option to Use a custom name for the package share and specify the custom Share name. Additional disk space is required on distribution points when you enable this option. It applies to all distribution points that receive this boot image.
Distribution Settings
On the Distribution Settings tab, select any of the following settings:
In the Distribution priority list, specify the priority level. Configuration Manager uses this priority list when the site distributes multiple packages to the same distribution point.
If you want to enable on-demand content distribution to preferred distribution points, select Enable for on-demand distribution. When you enable this setting, if a client requests the content for the package and the content isn't available on any distribution points, then the management point distributes the content. For more information, see On-demand content distribution.
To specify how you want the site to distribute the boot image to distribution points that are enabled for prestaged content, set the Prestaged distribution point settings. For more information about prestaged content, see Prestage content.
Content Locations
On the Content Locations tab, select the distribution point or distribution point group, and use the following actions:
Validate: Check the integrity of the boot image package on the selected distribution point or distribution point group.
Redistribute: Distribute the boot image to the selected distribution point or distribution point group again.
Remove: Delete the boot image from the selected distribution point or distribution point group.
Security
On the Security tab, view the administrative users that have permissions to this object.
Configure a boot image for PXE
Before you can use a boot image for a PXE-based deployment, configure the boot image to deploy from a PXE-enabled distribution point.
In the Configuration Manager console, go to the Software Library workspace, expand Operating Systems, and then select the Boot Images node.
Select the boot image that you want to modify.
On the Home tab of the ribbon, in the Properties group, select Properties.
On the Data Source tab, select Deploy this boot image from the PXE-enabled distribution point. For more information, see Use PXE to deploy Windows over the network.
Configure multiple languages
Tip
Starting in version 1910, configure the default keyboard layout on the properties of a boot image. For more information, see Customization.
Boot images are language neutral. This functionality allows you to use one boot image to display the task sequence text in multiple languages while in WinPE. Include the appropriate language support from the boot image Optional Components tab. Then set the appropriate task sequence variable to indicate which language to display. The language of the deployed OS is independent from the language in WinPE. The language that WinPE displays to the user is determined as follows:
When a user runs the task sequence from an existing OS, Configuration Manager automatically uses the language configured for the user. When the task sequence automatically runs as the result of a mandatory deployment deadline, Configuration Manager uses the language of the OS.
For OS deployments that use PXE or media, set the language ID value in the SMSTSLanguageFolder variable as part of a prestart command. When the computer boots to WinPE, messages are displayed in the language that you specified in the variable. If there's an error accessing the language resource file in the specified folder, or you don't set the variable, WinPE displays messages in the default language.
Note
When you protect media with a password, the text that prompts the user for the password is always displayed in the WinPE language.
Use the following procedure to set the WinPE language for PXE or media-initiated OS deployments.
Set the Windows PE language for a PXE or media-initiated OS deployment
Before you update the boot image, verify that the appropriate task sequence resource file (tsres.dll) is in the corresponding language folder on the site server. For example, the English resource file is in the following location:
<ConfigMgrInstallationFolder>OSDbinx6400000409tsres.dllAs part of your prestart command, set the SMSTSLanguageFolder environment variable to the appropriate language ID. The language ID must be specified by using decimal and not hexadecimal format. For example, to set the language ID to English, specify the decimal value 1033, not the hexadecimal value 00000409 of the folder name.